PM2.5 elemental composition in indoor residential environments and co-exposure effects on respiratory health in an industrial area.

This study aimed to identify and characterise indoor sources of particulate matter (PM) in domestic environments. 74 inhabited apartments located in the urban area of Gela (Sicily, Italy), close to a refinery, and in three villages of the hinterland were evaluated, in real-world conditions, for the elemental composition of PM2.5. The samples were collected simultaneously inside and outside each apartment for 48 h. In addition, two of the apartments were simultaneously studied for four weeks. The elemental composition of PM2.5 was determined by applying a chemical fractionation procedure followed by inductively-coupled plasma spectrometry analysis, with both optical emission and mass detection. The extractable, more bio-accessible fraction (ext), and the mineralised residual fraction (res) of each element were determined, thus increasing the selectivity of elements as source tracers. Indoor air in the considered apartments was affected by both outdoor pollution and specific indoor emission sources. The behaviour of each source was studied in detail, identifying a reliable tracer: Tires for soil, Asext for industrial sources, Vext for heavy oil combustion, Ce for cigarette smoking and Mo for the use of vacuum dust cleaners. Asext and Vext showed an excellent infiltration capacity, while the concentration of Tires was affected by a low infiltration capacity and by the contribution of particles re-suspension caused by the residents' movements. In the case of Ce and Mo, indoor concentrations were much higher than outdoor with a high variability among the apartments, due to the inhabitants' habits concerning cigarette smoke and use of electric appliances. To test the overall effect of the concomitant exposure to the identified sources on Wh12 M and on DDA, a WQS analysis was conducted. Cigarette smoking and heavily oil combustion driven the Wh12 M odds increase, while the DDA odds increase was mainly driven by heavily oil combustion and the use of vacuum dust cleaners.

Levels of Polychlorinated Dibenzo-p-Dioxins/Furans and Polychlorinated Biphenyls in Free-Range Hen Eggs in Central Italy and Estimated Human Dietary Exposure.

ABSTRACT: The aim of the present study was to evaluate the contamination levels of some classes of persistent organic pollutants in free-range hen eggs and to estimate the related human dietary exposure in a site of national interest, characterized by a serious state of environmental pollution in the Bussi sul Tirino area in central Italy. For these purposes, 17 samples of free-range hen eggs collected in home-producing farms located in the site of national interest territory were analyzed for 17 polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), 12 dioxin-like polychlorinated biphenyls (dl-PCBs), and 6 non-dioxin-like PCBs (ndl-PCBs). Dietary exposure was assessed assuming a standard consumption of eggs per week. The concentration of ∑PCDD/Fs plus dl-PCBs ranged from 0.463 to 8.028 pg toxic equivalent g-1 fat, whereas the mean contamination level of the ∑ndl-PCBs ranged from 0.234 to 7.741 ng toxic equivalent g-1 fat. PCDD/Fs and PCBs contamination levels were lower than maximum values established by the Commission Regulation (European Union) 1259/2011, except for one sample. The estimated weekly intake, calculated to evaluate the contribution in terms of the monitored pollutants of the locally produced eggs to the diet, was lower than the tolerable weekly intake established by the European Food Safety Authority.

A combined chemical/size fractionation approach to study winter/summer variations, ageing and source strength of atmospheric particles.

We studied the size distribution of ions (Cl-, NO3-, SO4=, Na+, NH4+, K+, Mg++, Ca++) and elements (As, Ba, Cd, Co, Cs, Cu, Fe, Li, Mn, Ni, Pb, Rb, Sb, Se, Sn, Sr, Ti, Tl, V, Zn) during the winter and summer seasons of seven consecutive years (2008-2014) in an area of the Po Valley (Northern Italy) characterised by industrial, agricultural and urban settings. The study included the collection and analysis of 41 series of size-segregated samples (MOUDI sampler, 10 stages, cut sizes from 0.18 to 18 µm). Ions were analysed by ion chromatography; elemental analysis was carried out by ICP-MS, by applying a chemical fractionation method able to increase the selectivity of PM source tracers. Our results indicate that important winter/summer variations occurred in both the concentration and size distribution of most PM components. These variations were explained in terms of variations in the strength of the prevailing sources of each component. The contribution of biomass burning for domestic heating was highlighted by the well-known tracer K+ but also by the soluble fraction of Rb, Cs and Li. Biomass burning contribution to atmospheric PM was mostly contained in the fine fraction, with a broad size-distribution from 0.18 to 1.8 µm. This source also appreciably increased the concentration of other elements in fine PM (As, Cd, Co, Mn, Pb, Sb, Sn). A few PM components (tracers of sea-spray, brake lining and some industries) did not show marked seasonal variations in concentration and size distribution. However, during winter, for brake lining and industry tracers we observed an upward shift in the dimension of fine particles and a downward shift in the dimension of coarse particles, due to the ageing of the air masses.

Exposure to individual and multiple carcinogenic metals during paediatric age: an experience from an Italian urban scenario.

BACKGROUND: Exposure to single and multiple carcinogenic metals and/or semimetals represents a major environmental risk factor for public health. In particular, children are more susceptible to environmental pollutants than adults, but specific studies are still limited. The aims of the present study were: 1) to trace the exposure and co-exposure profiles to eight known or suspected carcinogenic metals and semimetals (As, Be, Cd, Co, Cr, Ni, Pb, and Sb); and: 2) to evaluate the influence of some possible interfering/confounding factors on the exposure to these elements during childhood. STUDY DESIGN: Cross-sectional study. METHODS: We recruited 159 healthy Italian children attending a primary school of the urban area of Rome, Italy. Selected metals were determined by inductively coupled plasma mass spectrometry on urinary samples collected at the end of a "typical" day (one sample for each child), while information about possible confounding/interfering factors were collected via questionnaires. RESULTS: The great part of the studied children resulted co-exposed to the monitored metals: 83.2%, 69.2%, 51.0% and 29.3% of the participants were concurrently exposed to at least two, three, four and five trace elements, respectively. Gender was the only one among the investigated variable that significantly influenced the co-exposure, with females resulting at lower risk (OR = 0.392; 95 IC = 0.156 - 0.989; p < 0.047). CONCLUSIONS: Given the importance of protecting child's health and the risks related to the exposure to carcinogenic metals, especially when they occur simultaneously, other researches in this field are strongly recommended.

Seasonal variations in the chemical composition of particulate matter: a case study in the Po Valley. Part II: concentration and solubility of micro- and trace-elements.

Size distribution (fine and coarse fraction) and solubility distribution (extracted and residual fraction) of 20 elements (As, Ba, Be, Cd, Co, Cu, Fe, Li, Mn, Pb, Ni, Rb, S, Sb, Se, Sn, Sr, Ti, Tl, V) in atmospheric particulate matter (PM) were determined during a 5-year field study carried out in the Po Valley (peri-urban area of Ferrara, in Northern Italy). By studying the contribution of the two size fractions and the two solubility fractions to the atmospheric concentration of each element, it was possible to obtain interesting information about the variability of PM sources, to assess the role played by atmospheric stability in determining pollution episodes, and to obtain an estimate of the bio-accessible fraction. Atmospheric stability is confirmed to be one of the main causes of atmospheric pollution in this area and is to be responsible for the pronounced winter increase in both PM and elemental concentration. Long-range transport of natural and polluted air masses caused temporary increases in PM and elemental concentration, while local industrial emission seemed to play a secondary role. Regulated elements were well below their concentration limit, but many toxic elements were in the form of fine particles and soluble chemical species, more accessible to the environment, and the human body.

Comparison of extracting solutions for elemental fractionation in airborne particulate matter.

It is here described the comparison of extraction efficiency of some solutions (acetate buffer, deionized water, diluted HNO(3) and EDTA) frequently adopted in literature for evaluating the elemental solubility in airborne particulate matter. This comparison was performed considering the distribution of As, Ba, Ca, Cd, Co, Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb, S, Si, Sb, Sn, Sr, Ti, V, Zn between the extractable and mineralized residual fractions on the NIST 1648 certified material, PM(10) real samples and size-segregated samples, collected by a 13-stage impactor. The extracting solutions were evaluated by comparing extractive efficiencies and robustness towards some factors, such as acidity and concentration of complexing species, that have great environmental variability and that could be able to modify the extractive efficiency. Furthermore, extraction methods application to size-segregated samples allowed estimating the selectivity of extracting solutions towards dimensionally characterized emission sources, as dusts originated from abrasion and road dust re-suspension. On the basis of the obtained results, it was possible to define the main advantages and disadvantages resulting from the use of different extracting solutions, necessary to make possible the comparison of environmental studies carried out in different extractive conditions and to start up a proper study for harmonizing extracting procedures.

Determination of soluble ions and elements in ambient air suspended particulate matter: Inter-technique comparison of XRF, IC and ICP for sample-by-sample quality control.

In this paper, we describe a validation procedure for chemical fractionation analysis of elements (Al, As, Ba, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, Pb, S, Sb, Si, Sr, Ti and V) and soluble ions (Cl(-), NO(3)(-), SO(4)(2-), Na(+), NH(4)(+), Mg(2+), Ca(2+)) in suspended particulate matter (PM). The procedure applies three distinct measurement techniques (XRF, IC and ICP-OES) to the analysis of individual samples. The techniques used generate different outputs at different stages in the procedure. This makes it possible to identify the contributions of specific parameters to measurement uncertainty. On this basis, we propose a scheme for controlling the analytical quality of data from individual samples in which inter-technique comparisons is used in the same way many analytical methods use surrogates. We apply this scheme to about 310 samples of PM(10) and PM(2.5) identifying and assessing the main factors contributing to measurement uncertainty. This procedure successfully resolved a number of difficulties frequently encountered during the analysis of PM, including lack of appropriate reference materials and the low reliability of alternative techniques of quality control. The results demonstrate the critical importance of sample treatment prior to destructive analysis by IC and ICP.